Printer Features Parameters
115
5
Maintenance
❖
❖❖
❖ Menu Protect
This procedure lets you protect
menu settings from accidental
change. It makes it impossible to
change menu settings with normal
procedures unless you perform the
required key operations. In a net-
work environment, only adminis-
trators can make changes to menu
settings.
• Level 1
You can protect “Maintenance”,
”System”, “Host Interface”,
“PCL Menu”, "PS Menu" and
"PDF Menu".
• Level 2
You can protect “Maintenance”,
”System”, “Host Interface”,
“PCL Menu”, "PS Menu", "PDF
Menu" and "Tray Paper Set-
tings" in System Settings.
• Off
Note
❒ Default: Level 2
❒ You can protect menu settings
using a Web browser.
❖
❖❖
❖ List / Test Print Lock
You can lock the [List / Test Print]
menu.
• Off
• On
Note
❒ Default: Off
System
❖
❖❖
❖ Print Error Report
Select this to have an error report
printed when a printer or memory
error occurs.
• On
• Off
Note
❒ Default: On
❖
❖❖
❖ Auto Continue
You can select this to enable Auto
Continue. When it is On, printing
continues after a system error oc-
curs.
• Off
• Immediate
• 1 minute
• 5 minutes
• 10 minutes
• 15 minutes
Note
❒ Default: Off
❖
❖❖
❖ Memory Overflow
Select this to have a memory over-
flow error report printed.
• Do not Print
• Error Information
Note
❒ Default: Do not Print
❖
❖❖
❖ Job Separation
You can enable Job Separation.
• On
• Off
Note
❒ Default: Off
❒ This menu appears only when a
finisher (optional) is installed.
MartiniC25-EN-Pref-F_FM_ZF.book Page 115 Tuesday, July 27, 2004 11:51 AM
To Next Page
Loading...
Need help?
General
