Troubleshooting
88
7
Stored files do not appear. User authentication may have
been disabled while [All Users]
is not specified.
Re-enable user authentication,
and then enable [All Users] for
the files that did not appear.
For details about enabling [All
Users], see p.11 “Specifying
Access Permission for Stored
Files”.
Destinations do not appear. User authentication may have
been disabled while [All Users]
is not specified.
Re-enable user authentication,
and then enable [All Users] for
the destinations that did not
appear.
For details about enabling [All
Users], see p.19 “Protecting the
Address Book”.
Cannot print when user au-
thentication has been speci-
fied.
User authentication may not
be specified in the printer
driver.
Specify user authentication in
the printer driver.
For details, see the printer
driver Help.
If you try to interrupt a job
while copying or scanning, an
authentication screen ap-
pears.
With this machine, you can
log off while copying or scan-
ning. If you try to interrupt
copying or scanning after log-
ging off, an authentication
screen appears.
Only the user who executed a
copying or scanning job can
interrupt it.Wait until the job
has completed or consult an
administrator or the user who
executed the job.
Cannot register entries in [Pro-
gram No.10] for program regis-
tration in the copier function.
If “Change Initial Mode” is set
to [Program No.10] in [General
Features] in [Copier / Document
Server Features], entries can be
registered in [Program No.10]
only by the machine adminis-
trator.
The machine administrator
must carry out the registra-
tion.
Condition Cause Solution
MarC25_EN_SecRef_F_FM.book Page 88 Monday, August 2, 2004 6:14 PM
To Next Page
Loading...
Need help?
General
