4.System Maintenance
90
The diagnostic LEDs circulate "E1, E2, E3" while formatting the HDD for restoration.
7. Wait for 15-20 minutes. When the diagnostic LEDs stop flashing and light "00", go to the copier
operation panel and press the Home button.
While waiting for 15-20 minutes, the diagnostic LEDs may display "FF" for several times,
but this does not indicate an error.
8. Start the initial setup of E-25C, by selecting the language on the operation panel.
9. Optional: If a non-bootable customized image backup is available on a USB flash drive, restore it
using Fiery System Restore. [Link to Restoring the E-25C System with Fiery System Restore
(WebTools)]
10. Optional: If a backup of the configuration settings is available, restore the configuration settings as
described in this document. [Link to Restoring Backup Files]
This can be useful if the backup of the configuration is more current than the backup of the system
(for example, when restored to the factory default) or if the configuration backup includes the job
log and VDP/FreeForm Resources.
11. Optional: After restoring the E-25C, run System Updates or Fiery Updates to ensure the latest E-
25C software version is installed.
When Fiery Updates has been used to update the system in this step, it is recommended to switch the
update feature to System Updates before you leave from the customer site. [Link to Enabling System
Updates and Automatic Backup]
To Next Page
Loading...
Need help?
General
