Use printer menus 52
On
Off*
Enhance the contrast and sharpness of low-resolution images.
Note: This setting has no effect on images with a resolution of 300 dpi or
higher.
Disabled
Enabled*
Enable the printer to wait for more data before canceling a print job.
15–65535 (40*)
Set the time in seconds for the printer to wait for more data before canceling a
print job.
Note: This menu item appears only when Wait Timeout is enabled.
Note: An asterisk (*) next to a value indicates the factory default setting.
PCL
[List of available fonts] (Courier*)
Select a font from the specified font source.
[List of available symbol set] (10U
PC-8*)
Specify the symbol set for each font name.
Note: A symbol set is a set of alphabetic and numeric characters, punctuation,
and special symbols. Symbol sets support the different languages or
specific programs such as math symbols for scientific text.
0.08–100 (10*)
Specify the pitch for fixed or monospaced fonts.
Note: Pitch refers to the number of fixed-space characters in a horizontal inch of
type.
Portrait*
Landscape
Reverse Portrait
Reverse Landscape
Specify the orientation of text and graphics on the page.
1–255
Specify the number of lines of text for each page printed through the PCL
datastream.
Notes:
• This menu item activates vertical escapement that causes the selected
number of requested lines to print between the default margins of the page.
• 60 is the U.S. factory default setting. 64 is the international factory default
setting.
1–30 (2*)
Set the initial minimum stroke width.
Note: Jobs printed in 4800 CQ use half the value.
To Next Page
Loading...
Need help?
General