Reference Manual V1.19 Software Versions 4.xx
Page 48 003R-682-119
11. Standard Printing – K35* (with Clock/Calendar)
The K35* range of firmware includes a standard print format and programmable printing. The
standard print format incorporates number of pieces and totals if counting is being used.
When the instrument has Print or Automatic print enabled, the standard print format will be used or if
configured, the custom print format will be used. If no programmable printing data is available, then
the standard printing format will be used.
Standard Printing Format:
Line 1:
- Six (6) digit sequential number that is automatically incremented with each printing, up to a
maximum of 999999.
- Current date and time, printed in the selected format.
Line 2: Displayed reading, units and G for Gross or N for Net.
Line 3: Alternate Gross or Net reading to line 2
- Net reading when the Gross reading is displayed on the second line,
- Gross reading when the Net reading is displayed on the second line.
Line 4: Tare reading when the Gross reading is displayed on the second line, and the Gross reading,
units and G for Gross or N for Net.
11.1. Printing Number of Pieces with Counting Active
If counting is active, the printout has a fifth line for the counting information (p for pieces):
To Next Page
Loading...
Need help?
General
