Roland FA-07 User Manual

17
Performance
Functions
Editing
Sequencer
(Creating Songs)
Sampler Pads DAW
Appendix
Overview Performing SettingsOverview
Getting Ready
Placing This Unit on a Stand
Be careful not to pinch your ngers when setting up the stand.
Place the instrument on the stand as follows.
* When using the KS-18Z, ensure that the height of the unit is one meter or lower.
If you’re using the FA-06/FA-07
If you want to place the FA-06/FA-07 on a stand, please use the KS-12 or KS-18Z stands manufactured by Roland.
* The illustration shows the FA-06.
KS-12
Adjust the width of the stand
so that the rubber feet on the
keyboard side of the bottom of
the keyboard t into the rubber
feet receptacles
Top view
KS-18Z
Align the front of the
FA with the front of
the stand
Adjust the width of the stand
so that the rubber feet of the FA
straddle the stand
Top view
Adjust so that the
height does not
exceed 1 meter
(Adjust the stand
to a level no
higher than the
fth level from
the bottom)

Roland FA-07 Specifications

General

Control type	Buttons
Backlight color	Red
Backlight buttons	Yes
MIDI-keyboard number of keys	76 keys
Product color	Black
Display type	LCD
Display diagonal	5 \
Interface	USB
Headphone outputs	1
USB ports quantity	2
Compatible memory cards	SDHC
6.35 mm (1⁄4-inch) output	3
Power source type	AC
Bit rate	16 bit
Product type	Digital synthesizer
Keyboard number of keys	76
Maximum polyphony (notes)	128
Reverberation effects quantity	6

Weight and Dimensions

Depth	311 mm
Width	1231 mm
Height	107 mm
Weight	8500 g