Roland FA-07 User Manual

Recording the Song
60
6. Press the [ ] button or the [7] (Start) button.
Recording starts, and the Realtime Rec window appears.
MEMO
You can close the Realtime Rec window by pressing the [7]
(Close) button or the [
] button.
To see it again, press the [
] button.
7. To stop recording, press the [ ] button.
The [ ] button goes dark, and recording ends.
MEMO
You can undo (cancel) the recorded result (p. 62).
Selecting the Performance Data to
Record (Recording Select)
You can select the performance data that is recorded by realtime
recording.
1. In the Realtime Rec Standby window (p. 59), press the [5]
(Rec Select) button.
The Recording Select window appears.
2. Use the cursor buttons to select a parameter, and use the
dial to edit the value.
Items with a check mark ( ) are recorded; items without a check
mark are not recorded.
For details on the recorded data, refer to “Performance data in a
track” (p.68).
Button Explanation
[3] (AllTrack O) Clears check marks from all tracks.
[4] (AllTrack On) Applies check marks to all tracks.
[5] (AllEvent O) Clears check marks from all event types.
[6] (AllEventk On) Applies check marks to all event types.
3. Press the [7] (Exit) button.
The Recording Select window closes.
Removing Unwanted Data During
Recording (Realtime Erase)
Realtime erase is a function that erases unwanted data during
realtime recording. This function is particularly useful during loop
recording, since it lets you erase data without stopping recording.
1. Start realtime recording (p. 59).
2. Press the [5] (Erase) button.
The Realtime Erase window appears.
3. Erase unwanted data.
Operation Explanation
Erase system
exclusive messages
Press the [5] (Erase SysEx) button.
The data is erased while you hold down the button.
Erase all data
Press the [6] (Erase All) button.
The data is erased while you hold down the button.
Erase notes of a
specic key
Press the corresponding key.
The data is erased while you hold down the key.
Erase notes of a
specic range of
keys
Press the top and bottom key of the range.
The data is erased while you hold down the keys.
4. Press the [7] (Close) button.
The Realtime Erase window closes.
Auditioning Sounds or Phrases During
Recording (Rehearsal Function)
During realtime recording, you can use the rehearsal function to
temporarily prevent recording from occurring. When you’re using
loop recording, this gives you a convenient way to practice the next
phrase you intend to play, before actually recording it.
1. Start realtime recording (p. 59).
2. Press the [6] (Rehearsal) button or the [ ] button.
The [REC] indicator blinks, indicating that the rehearsal function is
active. In this state, notes you play are not recorded.
3. Press the [6] (Rehearsal) button or the [ ] button.
Recording resumes.

Roland FA-07 Specifications

General

Control type	Buttons
Backlight color	Red
Backlight buttons	Yes
MIDI-keyboard number of keys	76 keys
Product color	Black
Display type	LCD
Display diagonal	5 \
Interface	USB
Headphone outputs	1
USB ports quantity	2
Compatible memory cards	SDHC
6.35 mm (1⁄4-inch) output	3
Power source type	AC
Bit rate	16 bit
Product type	Digital synthesizer
Keyboard number of keys	76
Maximum polyphony (notes)	128
Reverberation effects quantity	6

Weight and Dimensions

Depth	311 mm
Width	1231 mm
Height	107 mm
Weight	8500 g