58
Recording the Song
The FA provides the following two ways for you to record a song.
Recording method Explanation
Realtime recording
Realtime recording is a method in which your
keyboard performance and controller operations are
recorded just as you perform them.
Step recording
Step recording is a method in which you can enter
notes and rests one by one. This method is typically
used when you need precise timing, such as when
entering notes for drums or bass.
Recording Workow
Here’s the workow when recording a new song on this unit.
Prepare for Recording
1: Select the song that you want to record
2: Select the tone that you want to record
3: Specify the time signature of the song
4: Specify the tempo of the song
Record the Song
Realtime Recording (p. 59)
Step Recording (p. 61)
Edit the Song
Edit Performance Data for Entire Tracks (Track Modify)
(p. 64)
Edit Individual Items of Performance Data (Microscope) (p. 68)
Adjust the Pan or Volume Balance (Mixer) (p. 72)
Save the Song
Save the Studio Set if necessary.
page 59
page 63
page 74
Prepare for Recording
Make the following preparations for recording.
1: Select the song that you want to record
Select the song that you want to record (p. 56).
If you want to record a new song, select a blank song (INIT SONG).
2: Select the tone that you want to record
Edit the studio set so that the tones you want to use for recording
are selected on each track (p. 44).
So that the tones you selected for recording are remembered, it’s a
good idea to save the studio set (p. 45).
* If you don’t save the studio set at the time of recording, playback
will occur using the tones that were previously saved.
3: Specify the time signature of the song
The time signature is typically set to 4/4 time.
If you want to use any other time signature, set the desired time
signature (p. 73).
4: Specify the tempo of the song
Specify the tempo of the song (p. 56).
About the SEQUENCER screen
51 2
6
43
No. Explanation Page
1
Track types
–
MIDI Records keyboard performance data.
PAD
Records pad performance data. One of the
tracks 1–16 can be used as the pad track.
2
Track number
–
3
Tone number, tone name
–
4
Mute and solo setting
p. 63
5
Measure number
–
6
Recorded data
* Note-o messages are not shown.
–
Note messages and other messages exist
Messages other than note messages exist
Note messages exist
MEMO
You can hold down the [SHIFT] button and press the
[7] (
) button to magnify the track settings display.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
