122
System mode
Settings related to the input source (INPUT SETTING)
Parameter
Range Description
Ext Output Asgn
(External Output Assign)
DRY,
MFX1,
MFX2,
COMP
Output destination of the external input sound that is mixed in
DRY:
Output to MIX OUTPUT jacks without passing through effects
MFX1 (2):
Output through multi-effects 1 (or 2)
COMP:
Output through the compressor
Ext Level L
(External Level L)
0–127 Volume level of the external input sound (left channel)
Ext Level R
(External Level R)
0–127 Volume level of the external input sound (right channel)
Ext Rev Send Lev
(External Reverb Send Level)
0–127 Depth of reverb applied to the external input sound
Set this to “0” if you don’t want to apply reverb.
Settings related to USB mode (USB)
Parameter
Range Description
USB Mode
Storage,
MIDI
Selects the mode in which the USB connector will be used.
STORAGE:
Storage mode. Select this if you want to transfer files.
MIDI:
MIDI mode. Select this if you want to exchange MIDI messages with a
sequencer or other program.
* You must switch the USB Mode before you connect the MC-808 to your
computer via the USB cable. If you change this setting while the MC-808 is
connected, the computer may fail to recognize it correctly.
* For details on connections to your computer in each USB Mode, refer to
“Connections”
(p. 133).
USB-MIDI Thru
(USB-MIDI Thru Switch)
OFF,
ON
When USB Mode is set to “MIDI,” this switch specifies whether MIDI messag-
es received at the MIDI connector will be retransmitted from the MIDI OUT
connector (ON) or not (OFF).
USB Storage – Refer to p. 132.
MIDI OUT MIDI IN
MC-808
USB OUT USB IN
USB-MIDI Thru Sw=OFF
MIDI OUT MIDI IN
MC-808
USB OUT USB IN
USB-MIDI Thru Sw=ON
Sound
Generator
Section
Sound
Generator
Section
MC-808_r_e.book 122 ページ ２００７年７月１７日 火曜日 午後５時１分
To Next Page
Loading...
Need help?
General
