136
Connecting to your computer via USB (USB mode)
In order to use the MC-808 as a USB MIDI device from your
computer, you must first install the USB MIDI driver. The USB MIDI
driver is on the included “MC-808 Editor CD” CD-ROM.
In order to use USB in MIDI mode, you must install the driver from
the included CD-ROM into your computer.
The driver program and the installation procedure to use will differ
depending on your system, so please be sure to read the following
Readme files provided on the CD-ROM.
Windows XP/2000
/Win2kXP/Readme_E.htm
Mac OS X
/MC-808 Driver OSX/Readme_E.htm
* “/” indicates a directory level.
Exchanging MIDI messages with your computer
(MIDI mode)
Driver installation and settings
Before Installing the Driver
You must set the USB Mode of the MC-808 to “MIDI
mode” (p. 132).
Caution when disconnecting
the USB cable
You must shut down your computer before disconnecting
the USB cable. Disconnecting the cable while your
computer’s power is on may destabilize its operation.
What is the USB MIDI driver?
The USB MIDI Driver is a software which passes data between
the MC-808 and the application (sequencer software, etc.) that is
running on the USB-connected computer.
The USB MIDI Driver sends data from the application to the
MC-808, and passes data from the MC-808 to the application.
fig.10-001.e
MC-808
Application
USB
Driver
Computer
USB connector
USB cable
USB connector
MC-808_r_e.book 136 ページ ２００７年７月１７日 火曜日 午後５時１分
To Next Page
Loading...
Need help?
General
