Roland MC-808 User Manual

81
Editing patterns (Pattern Edit)
Pattern mode
1. Depending on the event that you want to insert, execute
one of the following.
• To insert one of the following events
Press [REC], and turn the VALUE dial or use [INC] [DEC] to
select the event that you want to insert.
fig.03-117
• To insert one of the following events
Press [TEMPO/MUTE CONTROL] so it’s lit, then press
[REC].
Turn the VALUE dial or use [INC] [DEC] to select the event
that you want to insert.
2. Press [ENTER].
3. Enter the location (measure-beat-tick) at which you want to
insert the event.
fig.03-118
Use [CURSOR ] to select the measure, beat, or tick field,
and turn the VALUE dial or use [INC] [DEC] to specify each
value.
4. Press [ENTER] to execute.
1. In the Microscope screen, access the event that you want to
erase.
2. Press [UNDO/ERASE].
The event will be erased.
The event erased at this time can be pasted in later if desired.
Copying/Pasting an event (p. 83)
Inserting an event (Create Event)
Note
Note
Program Change Program Change
Control Change Control Change
Pitch Bend Pitch Bend
Poly Aftertouch Polyphonic Aftertouch
Ch Aftertouch Channel Aftertouch
System Exclusive Messages
Tempo Change
Mute Control
Erasing an event (Erase Event)
MC-808_r_e.book 81 ページ ２００７年７月１７日 火曜日 午後５時１分

Roland MC-808 Specifications

General

Brand	Roland
Model	MC-808
Category	Music Mixer
Language	English