137
Using MC-808 editor
To help you take even greater advantage of its functionality, the MC-808 comes with MC-808 Editor software. MC-808 Editor enables
you to use your own computer screen to edit patch, rhythm, and sample parameters that cannot be edited using the MC-808 itself
and allows you to modify samples, all while enjoying the use of an efficient, graphical editing environment.
For further information on the parameters that can be edited using the editor, refer to the included “Sound & Parameter List.”
Detailed instructions on installing the software can be found in the
online manual contained on the “MC-808 Editor CD” CD-ROM.
•
Windows users
In the “MC-808 Editor CD” CD-ROM, open the
“Readme_E.txt.”
•
Macintosh users
In the “MC-808 Editor CD” CD-ROM, open the
“Readme(English).txt.”
1.
Make sure that the System USB setting is set to MIDI
(p. 132).
* If it is set to Storage, you cannot use the editor via a USB connection.
2.
Use an USB cable (sold separately) to connect the MC-808
and your computer.
fig.11-001.j
If you start up the sample editor within MC-808 editor, the MC-808
will automatically switch to PC mode and will be inoperable from its
own panel. This prevents conflict between operations on your
computer and on the MC-808 itself.
fig.11-002
When you finish using the editor, the MC-808 will exit PC mode, and
the normal screen will reappear.
Only in the event of emergencies, such as when your computer
has crashed, you can press [EXIT] to exit PC mode. A screen
will ask you for confirmation; press [ENTER] and the MC-808
will be forcibly returned to the normal screen.
Installing MC-808 editor
into your computer
Making connections
MC-808
USB
USB
Windows
Macintosh
About PC Mode
MC-808_r_e.book 137 ページ ２００７年７月１７日 火曜日 午後５時１分
To Next Page
Loading...
Need help?
General
