ŝ120Ş
ƈ If you set the operation sound to ON, various sounds will be activated for camera startup,
when button are pressed, and if there is a card error, so that you can be aware of the camera
operation status.
ƃ How to set the sound
1. Press the Menu button and select the [ ] menu tab.
2. Press the Right button and select the [Sound] menu
by pressing the Up/ Down button.
3. Press the Right button and select a desired sub menu.
[Sound] sub menu : Off/ Low/ Medium/ High
4. Press the OK button to set the setting.
LCD brightness
ƈ You can adjust the Rear, Finder and Top LCD brightness.
ƃ How to set the brightness
1. Press the Menu button and select the [ ] menu tab.
2. Press the Right button and select the [Brightness] menu
by pressing the Up/ Down button.
3. Press the Right button and select a desired LCD
by pressing the Up/ Down button.
4. Press the Right button and select a desired sub menu.
- [Brightness] sub menu : Dark, Normal, Bright
5. Press the OK button to set the setting.
Date Type
World Time
Imprint
Sound
Brightness
Video Out
Quick View
World Time
Imprint
Sound
Brightness
Video Out
Quick View
Auto Rotating
Top LCD
Main LCD
EVF
Dark
Normal
Bright
Low
Medium
High
Off
Sound
To Next Page
Loading...
Need help?
General
