ŝ160Ş
ƃ To get an image that can be recognized as a text :
-
Keep a distance that you can capture the image clearly between the subject and the camera.
- The subject need to be centered.
- Avoid camera shake to get a good image.
ƃ Refer to the [Help] menu in Digimax Reader for further information.
INFORMATION
9. Select the file type that you want.
Selectable file types : *.TXT, *.HWP, *.DOC, *.RTF
FAQ
ƈ Please check the following if the USB connection malfunctions.
[Case 1] The camera power is off.
ƍ Turn the camera power on.
[Case 2] USB Driver is not installed correctly.
ƍ Install the USB Driver correctly. Refer to page 138.
[Case 3] The USB cable is not connected or you are using a cable with an incorrect
specification.
ƍ Use a USB cable with the correct specification.
[Case 4] The camera is not recognized by your PC.
Sometimes, the camera may appear under [Unknown Devices] in Device
Manager.
ƍ Install the camera driver correctly.
Turn off the camera, remove the USB cable, plug in the USB cable again, and
then turn on the camera.
Digimax Reader
To Next Page
Loading...
Need help?
General
