ŝ122Ş
ƈ If you enable Quick View before capturing an image, you can view the image you just
captured on the LCD for the duration set in the [Quick View] setup. Quick view is possible
only with still images.
ƃ How to set the quick view
1. Press the Menu button and select the [ ] menu tab.
2. Press the Right button and select the [Quick View] menu
by pressing the Up/ Down button.
3. Press the Right button and select a desired sub menu by
pressing the Up/ Down button.
[Off] : The quick view function can’t be activated.
[0.5, 1, 3, 5 sec] : The captured image is briefly displayed
during the selected time.
4. Press the OK button to set the setting.
Sound
Brightness
Video Out
Quick View
Rotating
USB
Reset All
5 sec
Off
0.5 sec
1 sec
3 sec
Quick view
To Next Page
Loading...
Need help?
General
