www.schaerer.com Product description
► In case of a technical problem or warranty claim, state the serial number indicated on the
serial plate.
Example of serial plate
The first 2 digits in the serial number denote the year the machine was manufactured, and the
second 2 digits indicate the calendar week.
Declaration of conformity
Manufacturer Documentation specialist
Schaerer AG
P.O. Box 336
Allmendweg 8
CH-4528 Zuchwil, Switzerland
T +41 (0)32 681 62 00
F +41 (0)32 681 64 04
info@schaerer.com
www.schaerer.com
Schaerer AG
Hans-Ulrich Hostettler
P.O. Box
Allmendweg 8
CH-4528 Zuchwil, Switzerland
Applied standards
The manufacturer indicated above hereby declares that this machine complies with all relevant
provisions of the specified directives. Any device modifications that are not approved by
Schaerer will render this declaration invalid. The following harmonised standards have been
applied. For proper implementation of the requirements, a quality management system certi-
fied to SN EN ISO 9001: 2008 by Bureau Veritas has been applied.
CE conformity
Machinery Directive 2006/42/EC EMC Directive 2004/108/EC
• EN 60335-1:2002 +A1 +A11 +A12 +A13
+A14 +A2
• EN 60335-2-75:2004 +A1 +A11 +A12
+A2
• EN 62233:2008
• EN 55014-1:2006 +A1
• EN 55014-2:1997 +A1 +A2
• EN 61000-3-2:2006
• EN 61000-3-3:2008
International CB
Safety EMC
• IEC 60335-1 Ed4.2:2006
• IEC 60335-2-14 Ed 5.1:2008
• IEC 60335-2-15 Ed 4.1:2000
• IEC 60335-2-15 Ed 5.2:2008
• IEC 60335-2-24 Ed6:2002/2006 +A1 +A2
• IEC 60335-2-75 Ed 2.2:2009
• IEC 62233 Ed1:2005
• IEC 60335-1 Ed5:2010-05
• IEC 60335-2-24 Ed7:2010
• CISPR 14-1:2005 +AMD1
• CISPR 14-2:1997 +AMD1 +AMD2
• IEC 61000-3-2:2005
• IEC 61000-3-3:2008
BA SCV_EN
V06 | 11.2015
18