www.schaerer.com Installation and commissioning
The "Water quality" supplementary instructions include information about recording water val-
ues and using filter equipment. The supplementary instructions can be requested from
Schaerer AG or downloaded directly from the MediaCentre on the website (http://www.schaer-
er.com/member).
Power requirements
Water pressure
Recommended: 0.1 – 0.6 MPa (1 – 6 bar)
Maximum: 0.6 MPa (6 bar)
Water inlet temperature
Minimum: 10°C
Maximum: 30°C
Switching between mains water supply and drinking water tank
(Option)
The set screw is located behind the
drinking water tank.
Switching from the mains water supply to the drinking water tank (e.g. for descaling) and vice
versa is possible with the "Aquaflex" option.
Option 1: Switching from mains water supply to drinking water tank
► Close the stop valve on the water supply line and, if necessary, detach the hose.
► Remove the right-hand front cover.
► Turn the rotary switch anticlockwise with the multi-tool.
The arrow on the rotary switch now points to the tank symbol.
► Fill and insert the drinking water tank.
Option 2: Switching from drinking water tank to mains water supply.
► Remove and empty the drinking water tank.
► Turn the rotary switch clockwise with the multi-tool.
The arrow on the rotary switch now points to the water tap symbol.
► Attach the right-hand front cover.
► Fit the hose for the water supply to the machine and the water supply line.
► Open the stop valve on the water supply line.
Installation
Unpacking the machine
Read the "Setting up the coffee machine" and "Power supply" chapters carefully before install-
ing.
► Unpack the machine.
► Check the remaining package contents for accessories.
► Remove the accessories supplied in the grounds container and water tank.
► Keep the original packaging in case the equipment needs to be sent back.
BA SCV_EN
V06 | 11.2015
22
To Next Page
Loading...
Need help?
General
