Operation www.schaerer.com
► Place a cup under the beverage outlet.
► Grasp the beverage outlet from the front and slide it into the correct position (see figure).
► Remove the cup after the beverage has been dispensed.
CAUTION!
Risk of machine
damage!
Coffee beverages
Lit beverage buttons signal that the respective beverage is ready for dispensing.
► Place a cup under the beverage outlet.
► Slide the beverage outlet into the desired position.
► Press the desired beverage button.
The beverage button flashes while the machine is dispensing the beverage.
The beverage name and the dispensing progress are shown on the display.
► Remove the cup after the beverage has been dispensed.
See also "Operation" - "Dispensing options" - "Stopping and cancelling beverage dispensing".
Beverages with ground coffee
The inlet for ground coffee is located between the bean hoppers.
Incorrect use may damage the machine.
Never put anything into the inlet other than ground coffee or cleaning tablets.
► Open the manual inlet.
The display messages "Insert ground coffee" and "Close manual inlet" appear.
If the manual inlet remains open for too long, the message "Manual inlet time limit exceeded"
appears and the procedure is cancelled.
► Pour in ground coffee (max. 15 g).
► Close the manual inlet lid.
The "Select coffee beverage" display instruction appears.
► Press the desired beverage button.
The beverage button flashes while the machine is dispensing the beverage.
The beverage name and the dispensing progress appear on the display.
The dispensing process cannot be interrupted.
► Remove the cup after the beverage has been dispensed.
BA SCV_EN
V06 | 11.2015
37