136
■
PLU/EAN stock
You can assign a stock quantity to each PLU/EAN code.
Shown below is an example of selecting “1 OVERWRITE”.
Procedure
▼
Select a pertinent PLU code, or
directly enter a PLU code or EAN
code.
▼
• After selecting “1 OVERWRITE,” select a pertinent PLU/EAN
code. Then the next screen will appear to show the following
items:
• CURRENT (Confi rmation only)
The current stock is displayed.
• NEW STOCK (Use the numeric entry)
Enter a new stock quantity (max. 7 digits: 0 to 9999.999)
NOTE
• If you need to add or subtract a stock quantity to or
from the current stock quantity, select “2 ADD” or
“3 SUBTRACT” and enter a value to be added or
subtracted.
• The entry of a new stock value will update to the PLU/
EAN stock counter.
■
EAN delete
You can delete the EAN codes which have not been accessed during the period you set in this program
when you execute the delete job in EAN DELETE in X1/Z1 mode.
Procedure
Program each item as follows:
• PERIOD (DAY) (Use the numeric entry)
Enter the EAN record delete period: 01 to 99 (00: Not delete
by the non-accessed deleting job)
■
PLU group text
You can program a maximum of 12 characters for each PLU group (0 to 99).
Procedure
Program the item as follows:
Select a pertinent PLU group from
the list.
▼
• TEXT (Use the character entry)
Description for the PLU group. Up to 12 characters can be
entered.
To Next Page
Loading...
Need help?
General
