155
■
Cashier
NOTE
In case that “cashier only system” is applied to your register, use Clerk programming settings
instead of this Cashier programming setting.
Procedure
Program each item as follows:
Select a pertinent cashier from the
cashiers list.
▼
The screen continues.
• SECRET CODE (Use the numeric entry)
Secret code (max. 4 digits: 0001 to 9999/0000)
• NAME (Use the character entry)
Name for the cashier. Up to 16 characters can be entered.
• G.C. COPY (Use the selective entry)
DISABLE: Disables guest check copy.
ENABLE: Enables guest check copy.
• VAT SHIFT (Use the selective entry)
STATE: Enables VAT shift entry.
NOT: Disables VAT shift entry.
• P.SFT START (Use the selective entry)
Price level range (start): (PRICE1 through PRICE3)
• P.SFT END (Use the selective entry)
Price level range (end): (PRICE1 through PRICE3)
• DRAWER No. (Use the selective entry)
DRAWER1/NONE
• PGM2 (Use the selective entry)
DISABLE: Disables operation in the PGM2 mode.
ENABLE: Enables operation in the PGM2 mode.
• PGM1 (Use the selective entry)
DISABLE: Disables operation in the PGM1 mode.
ENABLE: Enables operation in the PGM1 mode.
• X1 (Use the selective entry)
DISABLE: Disables operation in the X1 mode.
ENABLE: Enables operation in the X1 mode.
• Z1 (Use the selective entry)
DISABLE: Disables operation in the Z1 mode.
ENABLE: Enables operation in the Z1 mode.
• X2Z2 (Use the selective entry)
DISABLE: Disables operation in the X2/Z2 mode.
ENABLE: Enables operation in the X2/Z2 mode.
• FLASH (Use the selective entry)
DISABLE: Disables operation in the FLASH mode.
ENABLE: Enables operation in the FLASH mode.
• AUTO KEY (Use the selective entry)
DISABLE: Disables operation in the AUTO KEY mode.
ENABLE: Enables operation in the AUTO KEY mode.
• SD CARD (Use the selective entry)
DISABLE: Disables operation in the SD CARD mode.
ENABLE: Enables operation in the SD CARD mode.
To Next Page
Loading...
Need help?
General
