175
Message Programming
Use the following procedure to select any option included in the message group:
Procedure
▼
1.
In the SETTING window, select “12 MESSAGE”.
• The MESSAGE window will appear.
2.
Select any option from the following options list:
1 RECEIPT LOGO
Receipt logo
2 E.BILL MESSAGE
Entertainment bill message
3 SCROLL MESSAGE
Scrolling message for customer
display
The following illustration shows those options included in this programming group.
12 MESSAGE 1 RECEIPT LOGO
l
See “Receipt logo” on page 175.
2 E.BILL MESSAGE
l
See “Entertainment bill message” on page 176.
3 SCROLL MESSAGE
l
See “Scrolling message for customer display”
on page 176.
■
Receipt logo
Your register can print programmed messages for customers on every receipt.
The logo text is printed in a centering form on the receipt.
Procedure
Program each item as follows:
• RECEIPT LOGO (Use the character entry)
Logo text for the receipt (max. 30 characters x 6 lines)
NOTE
The register provides the following patterns of receipt logo, and the default is the pattern 6.
At the default, the fi rst 3 lines are used as header, and the last 3 lines are used as footer.
Pattern 1: 3 line text header
Pattern 2: Image logo header
Pattern 3: Image logo header + 3 line text footer
Pattern 4: 6 line text header
Pattern 5: Image logo header + 3 line text header
Pattern 6: 3 line text header + 3 line text footer
To change the receipt logo pattern, consult your authorized SHARP dealer.
Some programmed text may not be printed depending on the pattern.
To Next Page
Loading...
Need help?
General
