Technical Instructions LMV Series
Document No. LV3-1000
Section 1 Page 4 SCC Inc.
Control Panel Components (continued)
Dual Fuel Module Accessories – Optional
The following accessories are optional when using an AGM60 dual fuel module.
AGG4.200
Mounting bracket to mount the AGM60 directly on
top of the LMV36 controller for a smaller footprint
Touchscreens – Optional
Touchscreen kits are available to provide a human machine interface for the LMV3. Kits come
with a touchscreen and a plate kit with all necessary inputs and outputs. Standard
communication is via Modbus TCP/IP. Other communication types are available. For more
technical information about touchscreens, refer to Document No. TS-1000.
TS…
Touchscreen kits with 6” or 10” touchscreen, power
supply, interconnect terminals, and optional PLC
Modbus Interface Module – Optional
A separate interface module is required for Modbus communication with the LMV3. The cable
that connects the interface module to the LMV3 is provided with the module.
OCI412.10
Modbus interface module for the LMV3
Control Panel Spare Parts – Optional
The LMV3 has one replaceable main power fuse. Each LMV3 comes with a spare fuse.
Additional spare fuses are available if necessary.
FUSE6.3A-SLOW
5 pack of LMV3 primary fuses - 6.3A, 250V,
5x20mm, slow blow, for 120 VAC power
To Next Page
Loading...
Need help?
General
