Approvals, certificates, standards
9.5 XR-300M EEC product group
SCALANCE X-300
248 Operating Instructions, 02/2012, A5E01113043-12
9.4.4 X-300EEC mechanical stability (in operation)
All variants of the IE Switch SCALANCE X-300EEC meet the following requirements for
mechanical stability:
● IEC 60068-2-6 (vibration)
5 – 9 Hz: 3.5 mm
9 – 150 Hz: 1 g
1 octave/min, 20 sweeps
● IEC 60068-2-27 (shock)
15 g, 11 ms duration
6 shocks per axis
For further details, refer to the technical specifications.
9.5 XR-300M EEC product group
9.5.1 XR-300M EEC approvals, certificates
Note
The specified approvals apply only when the corresponding mark is printed on the product.
You can check which of the following approvals have been granted for your product by the
markings on the type plate.
EC directives
SIMATIC NET products meet the requirements and aims of the following EC directives.
Low voltage directive (electromagnetic compatibility)
The SIMATIC NET product meets the requirements of the EC Directive:
2004/108/EEC "Electromagnetic Compatibility"
The product is designed for use in the following areas:
Requirements Area of application
Emission Immunity
Industrial area EN 61000-6-4: 2007 EN 61000-6-2: 2005
To Next Page
Loading...
Need help?
General
