Approvals, certificates, standards
9.8 MM900 product group
SCALANCE X-300
266 Operating Instructions, 02/2012, A5E01113043-12
The SCALANCE MM900 media modules have the following approvals:
NOTICE
Issued approvals on the type plate of the device
The specified approvals apply only when the corresponding mark is printed on the product.
You can check which of the following approvals have been granted for your product by the
markings on the type plate.
● EN 60079-15 : 2005
EN 60079-0:2006
II 3 G Ex nA II T...
KEMA 07 ATEX 0145X
● c-UL-us
UL 60950-1 (Information Technology Equipment) CSA C22.2 No. 60950-1
● c-UL-us
UL 508 (Industrial Control Equipment) CSA C22.2 No. 142-M1987
● c-UL-us for Hazardous Location
UL 1604 and UL 2279
or ANSI/ISA 12.12.01
Approved for use in
Cl. 1, Div. 2, GP. A, B, C, D, T...
Cl. 1, Zone 2, GP. IIC T...
● FM 3611 Hazardous (Classified) Location Electrical Equipment
Non Incendive / Class I / Division 2 / Groups A,B,C,D / T*
Non Incendive / Class I / Zone 2 / Group IIC / T*
● AS/NZS 2064 (Class A)
(T... / T* = For detailed information on the temperature class, refer to the type plate)
9.8.2 MM900 declaration of conformity
Declaration of Conformity
You will find the EC Declaration of Conformity for these products on the Internet at the
following address:
http://support.automation.siemens.com/WW/view/en/33118441
--> Entry list
--> Entry type "Certificates"
--> Certificate type "Declaration of Conformity"
Example German: "EG-Konformitätserklärung SCALANCE X310",
Example English: "Declaration of Conformity SCALANCE X310".
To Next Page
Loading...
Need help?
General
