Siemens SINUMERIK 840C User Manual

10 Lists 01.93
10.1.1 Compatibility list, Version 10 to Version 20
10.1.1 Compatibility list, Version 10 to Version 20
L971/L972
R20 Omitted Control parameter ———
R22 New ——— Tool probe No.
R23 Tool length definition Control parameter
R25 New
——— Variable measuring speed
Version 10 Version 20 onwards
Function of L971 now by calling L972. L971 is only an auxiliary program.
L973 only for calibrating the workpiece probe.
No blank measurement!
R11 Omitted EV memory number ———
R21 Omitted Control parameter ———
R22 Probe type Probe no.
R23 Control parameter Control parameter
R25 New
——— Var. measuring speed
R34 Omitted Compensation area with
averaging
———
Version 20 onwardsVersion 10
L974 now also for blank measurement!
R22 New ——— Probe no.
R23 Number of measurements Control parameter
R24 Control parameter Number of measurements
R25 Control parameter Var. measuring speed
R26 Offset Now R19
R35 Omitted Tolerance Now R40/R41
Version 10 Version 20 onwards
10–20 © Siemens AG 1990 All Rights Reserved 6FC5197- AB70
SINUMERIK 840/850/880 (BN)

Siemens SINUMERIK 840C Specifications

General

Brand	Siemens
Model	SINUMERIK 840C
Category	Control Unit
Language	English