Siemens SIPROTEC 7SD610 User Manual

Technical Data
4.1 General
SIPROTEC, 7SD610, Manual
C53000-G1176-C145-6, Release date 02.2011
331
EMC tests for noise emission (type test)
1)
From production series /EE, limit class A to IEC-CISPR 11
4.1.6 Mechanical Tests
Vibration and Shock Resistance during Stationary Operation
Line conducted HF, amplitude modulated
IEC 61000-4-6, Class III
10 V; 150 kHz to 80 MHz; 80 % AM; 1 kHz
Power system frequency magnetic field
IEC 60255-6
IEC 61000-4-8, Class IV
0,5 mT; 50 Hz,
30 A/m continuous; 300 A/m for 3 s; 50 Hz
Oscillatory Surge Withstand Capability
IEEE Std C37.90.1
2,5kV (peak); 1MHz; τ = 15 µs; 400 Surges per s; test duration
2s; R
i
= 200 Ω
Fast Transient Surge Withstand Cap.
IEEE Std C37.90.1
4 kV; 5 ns/50 ns; 5 kHz; burst lenght = 15 ms; repetition rate
300 ms; both polarities; R
i
= 50 Ω; test duration 1 min
Radiated Electromagnetic Interference
IEEE Std C37.90.2-2004
35 V/m; 80 MHz to 1000 MHz; key ring test
Damped oscillations IEC 60694, IEC 61000-4-12 2,5 kV (peak value), polarity alternating 100 kHz, 1 MHz,
R
i
= 200 Ω
Standard: EN 61000-6-3 (generic standard)
Radio noise voltage to lines, only auxiliary voltage IEC-
CISPR 22
150 kHz to 30 MHz
Limit class B
1)
Interference field strength
IEC-CISPR 22
30 MHz to 1000 MHz
Limit class B
1)
Harmonic currents on the network lead at 230 VAC IEC
61000-3-2
IEC 61000-3-2
Class A limits are observed
Voltage fluctuations and flicker on the network incoming
feeder at 230 VAC
IEC 61000-3-3
Limits are observed
Standards: IEC 60255-21 and IEC 60068
Oscillation
IEC 60255-21-1, Class 2
IEC 60068-2-6
Sinusoidal
10 Hz to 60 Hz: ± 0.075 mm amplitude;
60 Hz to 150 Hz: 1 g Acceleration
Frequency sweep 1 octave/min
20 cycles in 3 orthogonal axes
Shock
IEC 60255-21-2, Class 1
IEC 60068-2-27
Semi-sinusoidal
5 g acceleration, duration 11 ms,
each 3 shocks (in both directions of the 3 axes)
Seismic vibration
IEC 60255-21-3, Class 1
IEC 60068-3-3
Sinusoidal
1Hz to 8Hz:± 3.5 mm amplitude (horizontal axis)
1 Hz to 8 Hz: ± 1.5 mm amplitude (vertical axis)
8 Hz to 35 Hz: 1 g acceleration (horizontal axis)
8 Hz to 35 Hz: 0.5 g acceleration (vertical axis)
Frequency sweep 1 octave/min
1 cycle in 3 orthogonal axes

Siemens SIPROTEC 7SD610 Specifications

General

Brand	Siemens
Model	SIPROTEC 7SD610
Category	Relays
Language	English