SIPROTEC, 7SJ62/64, Manual
C53000-G1140-C207-2, Release date 01.2008
3
Preface
Purpose of this Manual
This manual describes the functions, operation, installation, and commissioning of devices 7SJ62/64. In par-
ticular, one will find:
• Information regarding the configuration of the scope of the device and a description of the device functions
and settings → Chapter 2;
• Instructions for Installation and Commissioning → Chapter 3;
• Compilation of the Technical Data → Chapter 4;
• As well as a compilation of the most significant data for advanced users → Appendix A.
General information with regard to design, configuration, and operation of SIPROTEC 4 devices are set out in
the SIPROTEC 4 System Description /1/.
Target Audience
Protection engineers, commissioning engineers, personnel concerned with adjustment, checking, and service
of selective protective equipment, automatic and control facilities, and personnel of electrical facilities and
power plants.
Applicability of this Manual
This manual applies to: SIPROTEC 4 Multi-Functional Protective Relay with Local Control 7SJ62/64; firmware
version V 4.7.
Indication of Conformity
This product complies with the directive of the Council of the European Communities on the
approximation of the laws of the Member States relating to electromagnetic compatibility (EMC
Council Directive 89/336/EEC) and concerning electrical equipment for use within specified
voltage limits (Low-voltage Directive 73/23 EEC).
This conformity has been established by means of tests conducted by Siemens AG in accor-
dance with Article 10 of the Council Directive in agreement with the generic standards EN
61000-6-2 and EN 61000-6-4 for the EMC directive, and with the standard EN 60255-6 for the
low-voltage directive.
The device has been designed and produced for industrial use.
The product conforms with the international standards of the series IEC 60255 and the German
standard VDE 0435.
www . ElectricalPartManuals . com
To Next Page
Loading...
Need help?
General