Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted
unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability
with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.
4 Cruise control system (CCS)
⇒ d4.1 escription”, page 24
⇒ c4.2 ruise control system”, page 24
4.1 General description
The Cruise control system is controlled by the engine control
unit.
– Activate/deactivate cruise control system ⇒ c4.2 ruise con‐
trol system”, page 24 .
Fault recognition and fault display
Faults from the Cruise control system are transmitted via the
engine control unit.
For fault finding, use the ⇒ Vehicle diagnostic tester in the mode
“Targeted fault finding”.
4.2 Activate/deactivate cruise control sys‐
tem
– Connect ⇒ Vehicle diagnostic tester.
– In the ⇒ Vehicle diagnostic tester, select the operating mode
“Targeted fault-finding”.
– Select the “Selected Functions/Components” and subse‐
quently the following menu points using the button “Skip”:
♦ Drivetrain
♦ 01 – Self-diagnosable systems
♦ 01 - Engine control unit/Direct fuel injection and preheating
system
♦ 01 - Functions
♦ Activate/deactivate cruise control system
Citigo 2012 ➤, Citigo-e iV 2020 ➤, Enyaq 2021 ➤, Enyaq Coupe 2021 ➤, Fabia 2000 ...
Electrical System - general notes - Edition 12.2021
24 Rep. gr.27 - Starter, current supply, CCS
To Next Page
Loading...
Need help?
General
