Skoda Rapid NH 2013 User Manual

Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted
unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability
with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.
• The selector lever is only correctly secured when the gripper
clamp is under tension.
• Only then the lock button at the handle may be pressed.
– Press lock button at selector lever handle.
– Install the cover for the selector lever.
– Inspect gearshift mechanism ⇒ a2.7 nd adjusting the selec‐
tor lever control cable”, page 141 .
2.8.2 Removing and installing selector lever
handle, Rapid
Special tools and workshop equipment required
♦ Release tool -T30098- (not illustrated)
♦ Hose clamp pilers -V.A.G 1275A-
– Fit the release tool -T30098- under the cover for shift mech‐
anism and carefully lift it in -direction of arrow-.
Octavia III 2013 ➤, Octavia III 2014 ➤, Rapid NH 2013 ➤, Rapid NH 2014 ➤
Gearbox 0CW-DSG - Edition 07.2022
148 Rep. gr.34 - Controls, housing

Skoda Rapid NH 2013 Specifications

General

Brand	Skoda
Model	Rapid NH 2013
Category	Automobile
Language	English