Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted
unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability
with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.
– Remove the mechatronics.
– Clean sealing surfaces on the gearbox and on the parking
lock cover.
– Grease the shaft seal in the cover with sealing grease -G
052 128 A1-.
– Install cover for parking lock and gearshift lever ⇒ p2 osi‐
tion”, page 240 .
After the repair, the gear oil is filled through the opening in the
cover for the parking brake.
1.4 Replacing bellows with clutch plate
Special tools and workshop equipment required
♦ Used oil collector and extractor -VAS 6622A-
♦ Cleaning solution -D 009 401 04-⇒ Electronic Catalogue of
Original Parts
Octavia III 2013 ➤, Octavia III 2014 ➤, Rapid NH 2013 ➤, Rapid NH 2014 ➤
Gearbox 0CW-DSG - Edition 07.2022
1. Mechatronics 79
To Next Page
Loading...
Need help?
General
