Skoda Rapid NH 2013 User Manual

Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted
unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability
with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.
3 Removing and installing the gearbox
⇒ t3.1 orques for gearbox”, page 155
⇒ t3.2 he gearbox”, page 158
⇒ t3.3 he gearbox”, page 211
3.1 Tightening torques for gearbox
⇒ t3.1.1 orques for gearbox, Octavia III”, page 155
⇒ t3.1.2 orques for gearbox, Rapid”, page 157
3.1.1 Tightening torques for gearbox, Octa‐
via III
Vehicles with 1.0 l TSI, 1.2 l TSI, and 1.4 l TSI engines
Position Screw Nm
1.3 M12 x 50 80
2 M 12 x 165 80
Starter fastening screw at the same time
Screw with threaded pin M 8 x 16
4 M12 x 70 80
8. 9 M12 x 70 80
Screw is accessible from the engine side
5, 6, 7 M10 x 55 40
A Dowel sleeves
Vehicles with 1.8 l TSI engine
Octavia III 2013 ➤, Octavia III 2014 ➤, Rapid NH 2013 ➤, Rapid NH 2014 ➤
Gearbox 0CW-DSG - Edition 07.2022
3. Removing and installing the gearbox 155

Skoda Rapid NH 2013 Specifications

General

Brand	Skoda
Model	Rapid NH 2013
Category	Automobile
Language	English