Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted
unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability
with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.
• Observe all lines and coolant hoses when lowering the gear‐
box.
• Do not bend or buckle selector lever control cable.
In some cases, the holders are installed at the front of the
gearbox.
Note
If a »new« gearbox is installed, the holders must be modified to
the »new« gearbox.
3.2.5 Removing the gearbox - Rapid, vehi‐
cles with diesel engines
Special tools and workshop equipment required
♦ Shock absorber set -T10001-
♦ Key 18 -T10509-
Octavia III 2013 ➤, Octavia III 2014 ➤, Rapid NH 2013 ➤, Rapid NH 2014 ➤
Gearbox 0CW-DSG - Edition 07.2022
3. Removing and installing the gearbox 199