C
0
-~
(I)
Cl.
0
Section 1 Operation
1-6. Picture Adjustments
1-6-1. White Balance Adjustment
1 -4811. Operation
During the adjustment, turn the red green and blue beams on and off
with the SCREEN switches on the front panel as required.
4,8 7 3
0 0 ;Qs»<C
Q Q Q <QsvstSM
0 0 •Q,m
"~"E "'"' MOM> .,,.,,
0 o~~ii O O O O ·o=::.~c
1
1 Display a test signal on the screen.
2 Press the GRAY button.
& o ·"·sc, o ,:,~ ..
"o o o "6'
6,9
2,5
The associated lamp lights and the internal gray signal is displayed
on the screen.
3 Press the BIAS button.
The associated lamp lights.
4 Adjust the white balance at the lowlight by pressing the BLUE,
GREEN and RED buttons t or t-.
5 Press the GRAY button again.
The associated lamp goes off and the internal gray signal
disappears.
6 Press the WHITE button.
The associated lamp lights and the internal 100% white signal is
displayed on the screen
To Next Page
Loading...
Need help?
General