Applying Special Effects (Nonlinear Effect Settings)
Degree of randomness in
horizontal waveform modulation
Degree of randomness in vertical
waveform modulation
Degree of randomness in both
vertical and horizontal directions
Degree of randomness in
waveform modulation
Amount of horizontal wave
modulation
Center point of horizontal
modulation range
Amount of vertical wave
modulation
Center point of vertical
modulation range
Amount of wave modulation
Center point of modulation range
Chapter
10
DME
Operations
When Size mode is selected
To randomize the modulated waveform
1
Press [Random], turning it on.
2
Set the following parameters.
When H&V mode is selected
When Size mode is selected
To limit the wave range
1
Press [Range], turning it on.
2
Set the following parameters.
When H&V mode is selected
Size
Envelope
Offset
To smooth the range envelope when the wave
range is limited
1
Press [Range Envelope], turning it on.
2
Set the following parameters.
When H&V mode is selected
Smoothness of envelope in
horizontal direction
Smoothness of envelope in
vertical direction
When Size mode is selected
To reverse the wave range
To reverse the horizontal wave range set with [Range]:
Press [Range Rev H], turning it on.
To reverse the vertical wave range set with [Range]:
Press [Range Rev V], turning it on.
Mosaic Glass Settings
When Size mode is selected
There are two modes: H&V and Size. You can set the size
and frequency of waves in the image, the wave form, the
amount of wave movement, and the range. In H&V mode,
you can also set the wave angle.
Applying the Mosaic Glass effect
Display the Non Linear >Mosaic Glass menu (4141.2).
The items displayed in the Mosaic Glass menu and the
parameters are the same as those for the Wave menu
(
1
p. 191).
Flag Settings
There are two modes: H&V and Size. You can set the size
and frequency of waves in the image, the wave form, the