Gives the image a
shadow.
Chapter
10
DME
Operations
Combination of Ch5 and Ch6, and Ch7 and Ch8
Combiner
Combiner
Combiner Settings
When multiple channels are selected on one keyer or for
one transition, the Combiner automatically combines the
selected images. Up to four channels can be combined.
You can also control the way in which the combination is
carried out, as a mix or an overlap with priority set
automatically. For a mix, you can control the relative
amounts of each channel.
Images can also be crossed in three dimensions.
Combination of Ch5, Ch6, Ch7, and Ch8
Combiner
Notes
•
The MKS-6570 can only use channels 1 and 2.
•
The MVE-8000A and MVE-9000 can only use channels
5 to 8.
•
Channels 1 and 2 and channels 5 to 8 cannot be
combined.
•
Three-dimensional image crossing is not supported on
the MKS-6570 or MVE-8000A.
Combination of channel 1 (Ch1) and channel 2
(Ch2)
Mixing of Ch1 and Ch2
If the Mix1 setting is 70, the proportion of the channels in
the mixed portion in the previous illustration is as shown
in the following table.
Combiner
Mixing of Ch5, Ch6, and Ch7
Combination of Ch5, Ch6, and Ch7
Combiner
If the Mix1 setting is 70 and the Mix2 setting is 40, the
proportions of the channels in the mixed portions in the
previous illustration are as shown in the following table.
To Next Page
Loading...
Need help?
General