Sony MVS-6520 User Manual

USO RESTRITO
Global Effect Operations 221
Chapter
10
DME
Operations
Mixing of Ch5 and Ch6, and Ch7 and Ch8 For “Ch5+Ch6+Ch7”
Under <Priority1> to <Priority3>, press [Ch5], [Ch6],
and [Ch7], respectively, to set the overlap priority.
Priority1: Ch5
Priority2: Ch6
Priority3: Ch7
If the Mix1 setting is 70 and the Mix2 setting is 40, the
proportions of the channels in the mixed portions in the
previous illustration are as shown in the following table.
Combination
Indication
in figure
Ch5
Ch6
Ch7
Ch8
Ch5 and Ch6
30%
70%
–
–
Ch7 and Ch8
–
–
60%
40%
Ch1 crossed with Ch2
For “Ch5+Ch6, Ch7+Ch8”
Under <Combiner1 Priority1> and <Combiner1 Priority2>, press [Ch5] and [Ch6] respectively, and under <Combiner2 Priority1> and <Combiner2
Priority2>, press [Ch8] and [Ch7] respectively, to set
the respective priorities for overlaying the images.
Combiner1
Priority1: Ch5
Priority2: Ch6
Combiner2
Priority1: Ch8
Priority2: Ch7
Setting the combiners
The setting menu differs according to the combiner usage
status.
For “Ch1+Ch2” (using MKS-6570)
1 Open the Global Effect >Ch1-Ch2 >Combiner Priority
menu (4211).
2 If [Mix] or [Auto] is on, turn it off.
3 Select the top channel in the <Priority1> group, or
select the bottom channel in the <Priority2> group.
4 To mix, press [Mix], turning it on.
5 Adjust the following parameter.
No.
Parameter
Adjustment
1
Mix1
Mix degree for channels 1 and 2
For “Ch5+Ch6+Ch7” and “Ch5+Ch6, Ch7+Ch8”
(using MVE-8000A/9000)
1 Open the Global Effect >Ch5-Ch8 >Combiner Priority
menu (4221).
2 If [Mix], [Auto], or [Depth] is on, turn it off.
3 Perform the following according to the overlap
method.
Combiner operations
Perform the following operations only when the DME is
MVE-8000A or MVE-9000.
Notes
It is not possible to select channels with buttons in the
control panel.
In the following, the example given is that channels 6 and
7 are combined, then channels 5+6 and channels 7+8 are
combined, but other combinations are also possible.
1 Open the Global Effect >Ch5-Ch8 >Combine Gp
Select menu (4227).
2 In the <Combine Gp Select> group, select the channel
combination.
• To combine channels 6 and 7, press [Ch6+Ch7],
turning it on.
• To combine the previously combined combinations
of channels 5 and 6, and channels 7 and 8, press
[Ch5+Ch6] and [Ch7+Ch8], turning them on.
Notes
The only two buttons that can be selected
simultaneously are the combination of [Ch5+Ch6] and
[Ch7+Ch8].

Sony MVS-6520 Specifications

General

Brand	Sony
Model	MVS-6520
Category	Switch
Language	English