Snapshot Operations in the Menus 275
Notes
A setting in the Setup menu determines whether key
disable is applied to cross-point hold or not.
For details,
1
“Selecting the Bank to Make the
Settings” (p. 357).
2 Select the following attributes in the <Attribute>
group as required.
Effect Dissolve: Apply effect dissolve.
Auto Transition: Apply auto transition.
GPI Output: Apply GPI output. When selected, set
the GPI number.
Deleting a snapshot
1
Open the M/E-1 >Misc >Snapshot menu (1177) and
press [Delete].
2
As required, press [Bank Sel] to change the bank.
3
Press the button for the number or name you want to
delete.
Renaming a snapshot register
1
Open the M/E-1 >Misc >Snapshot menu (1177) and
press [Rename].
2
As required, press [Bank Sel] to change the bank.
3
Press the number or name button for the name you
want to change.
4
Enter the new name, and press [Enter].
To Next Page
Loading...
Need help?
General