Menu Access by Pressing a Button Twice
M/E-1, PGM/PST >Wipe >Main Pattern
M/E-1, PGM/PST >DME Wipe >XX
• Snapshot >Master Snapshot >Store
a)
• Snapshot >Snapshot >XX
b)
• Effect >Master Timeline >Store
a)
• Effect >Effect 1-99 >XX
b)
Shotbox >Register >Store/Recall
Misc >Transition >Key/ME/FTB
Snapshot >Key Snapshot >XX
Transition control block
M/E-1, PGM/PST >Misc >Transition
FM1&2 CLIP, FM3&4 CLIP, FM5&6
CLIP, FM7&8 CLIP
M/E-1, PGM/PST >Misc >Clip Transition
M/E-1, PGM/PST >Misc >Key Priority
M/E-1, PGM/PST >Misc >Next Key Priority
WIPE
(Independent key transition type
selection buttons)
• M/E-1 >Key1, 2, 3, 4 >Transition >Wipe Adjust >Pattern Select
• PGM/PST >DSK1, 2, 3, 4 >Transition >Wipe Adjust >Pattern
Select
DME
(Independent key transition type
selection buttons)
• M/E-1 >Key1, 2, 3, 4 >Transition >DME Wipe Adjust >1ch
Pattern Select
• PGM/PST >DSK1, 2, 3, 4 >Transition >DME Wipe Adjust >1ch
Pattern Select
Snapshot >Key Snapshot >XX
Device control block
DME1, DME2, DME5 to DME8
a)
DEV1 to DEV12 assigned buttons
• Device >DDR/VTR >Cueup & Play
b)
• Device >DDR/VTR >Timeline
c)
FM1CLIP to FM8CLIP assigned
buttons
Frame Memory >Clip >Recall
• M/E-1 >Key1, 2 >Processed Key/Resizer
• P/P >DSK1, 2 >Processed Key/Resizer
a)
When the three-dimensional transformation operation mode is enabled.
b)
When the [MENU] button is Off.
c)
When the [MENU] button is On.
d)
When the resizer operation mode is enabled.
Flexi Pad
To Next Page
Loading...
Need help?
General