Stihl MS 261 C User Manual

89MS 261, MS 261 C
: Push leg (1) of torsion spring in
direction of rear handle.
: Push the lockout lever (2) into its
mounts (arrow).
: Rotate the lockout lever (1) in
direction of rear handle and
engage the torsion
spring (arrow).
The lockout lever (1) may pop out.
: Attach the throttle rod (1) to the
trigger (2) and fit it in the
guide (arrow).
5902RA317 TG
2
1
5902RA318 TG
1
5902RA319 TG
2
1
: Engage tabs (2) of handle
molding (1) in the
openings (arrow).
– Push down the handle
molding (1) until it snaps into
position.
– Check operation.
– Reassemble all other parts in the
reverse sequence.
10.3 Throttle Trigger/Lockout
Lever – QuickStop Super
: Push the tabs (1) apart and
through the tank housing.
5902RA320 TG
1
2
5902RA307 TG
1
1
: Remove the handle molding (1).
: Take the throttle rod (1) out of the
guide (arrow) and disconnect it
from the throttle trigger (2).
: Use a drift (2) to drive out the
pin (1).
5902RA321 TG
1
5902RA322 TG
1
2
5902RA323 TG
1
2

Stihl MS 261 C Specifications

General

Brand	Stihl
Model	MS 261 C
Category	Chainsaw
Language	English