北米Model "A3240BE-A" EDITED: 2022/ 7/ 29
& Power saving function of ac-
cess key fob
S02AP22
This function stops the access key fob
from receiving signals and helps minimize
the battery consumption of the access key
fob.
1. Press the “
” button twice while hold-
ing the “
” button.
1 LED indicator
2. Confirm that the LED indicator blinks 4
times to notify that the setting is
complete.
When the access key fob is in the power
save mode, the keyless access function
and push-button start system will not be
available.
To cancel the power save mode, press one
of the buttons on the access key fob.
& Disabling keyless access
function
S02AP07
WARNING
If you wear an implanted pacemaker
or an implanted defibrillator, per-
form the procedure described in
“By operating the driver’s door”
�P129 to disable the keyless access
function. If you perform the proce-
dure described in “By operating the
access key fob” �P127, the opera-
tion of an implanted pacemaker or
implanted defibrillator may be af-
fected by the radio waves from the
transmitter antenna.
When the vehicle is not going to be used
for a long time or when you choose not to
use the keyless access function, the key-
less access function can be disabled.
NOTE
. The locking and unlocking function
by the remote keyless entry system
is not disabled.
. To start the engine while the func-
tions are disabled, perform the pro-
cedure described in “Starting en-
gine” �P465.
! Disabling functions
S02AP0701
! By operating the access key fob
S02AP070102
To disable the keyless access function by
operating the access key fob, register a
PIN code for PIN Code Access. For details
about registering a PIN code, refer to
“Unlock using PIN Code Access” �P124.
1. Open the driver’s door.
2. Rotate the lock lever forward.
– CONTINUED –
Keyless access with push-button start system
127
2
Keys and doors
To Next Page
Loading...
