北米Model "A3240BE-A" EDITED: 2022/ 7/ 29
& Reverse Automatic Braking
(RAB) system ON/OFF setting
S07BN05
While the select lever is shifted to the “R”
position, the below functions of the Re-
verse Automatic Braking (RAB) system
can be set by operating the center in-
formation display.
1 ON setting key of Automatic Braking
function
2 OFF setting key of Automatic Braking
function
3 ON setting key of the Sonar Audible
Alarm function
4 OFF setting key of the Sonar Audible
Alarm function
When the ON setting key is shown, the
corresponding setting is ON.
Touch and hold the ON setting key to turn
the setting OFF.
When the OFF setting is shown, the
corresponding setting is OFF.
Touch and hold the OFF setting key to turn
the setting ON.
When the Automatic Braking function are
turned OFF, the following indicator(s) will
illuminate.
The RAB OFF indicator will turn off when
the corresponding function is turned ON.
NOTE
When the settings cannot be changed,
the ON/OFF setting key will be grayed
out.
Also, the following settings can be chan-
ged by operating the center information
display.
. Warning Volume
. Sonar Audible Alarm
For details, refer to “Car settings” �P215.
& RAB warning indicator
S07BN07
1 RAB malfunction message
2 RAB warning indicator
If the Reverse Automatic Braking (RAB)
system malfunctions, the above indicator
illuminates on the combination meter.
Contact the nearest SUBARU dealer for
details.
– CONTINUED –
Reverse Automatic Braking (RAB) system
401
7
Starting and operating
To Next Page
Loading...
Need help?
General
