北米Model "A3240BE-A" EDITED: 2022/ 7/ 29
3. When installing the wiper blade as-
sembly, align it with the wiper arm
connection part and then slide it in the
opposite direction of removal to install.
After installing the wiper blade assem-
bly, check that the connection part is
locked completely.
4. Hold the wiper arm by hand and slowly
lower it in position.
& Window wiper blade rubber
S11AZ05
Replace the wiper blade rubber according
to the following procedure.
1. Pull the wiper blade rubber until the slit
on the underside of the wiper blade is
in the removal position, as shown in the
illustration, so that it can be removed.
2. Pull the end of the wiper blade rubber
through the slit to remove it.
3. To install a new wiper blade rubber,
perform the removal procedure in the
reverse order. After installation, check
that the tip of the wiper rubber has
reached the end of the cap.
NOTE
It may be difficult to perform the wiper
blade rubber replacement. We recom-
mend that you contact your SUBARU
dealer for wiper blade rubber replace-
ment if necessary.
Replacement of wiper blades
506
To Next Page
Loading...
Need help?
General
