Subaru Ascent 2023 User Manual

(467,1)
北米Model "A3240BE-A" EDITED: 2022/ 7/ 29
& Switching power status
S09AP02
1. Apply the parking brake.
2. Shift the select lever to the “P” (Park)
position.
3. Depress the brake pedal.
4. Hold the access key fob with the
buttons facing you, and touch the
push-button ignition switch with it.
When the communication between the
access key fob and the vehicle is
completed, a chime (ding) will sound.
At the same time, the status of the
push-button ignition switch changes to
either of the following.
. When the keyless access with push-
button start system is deactivated:
“ACC”
. Under other conditions: “ON”
5. When the keyless access with push-
button start system is deactivated,
press the push-button ignition switch
with the brake pedal released. The
status of the push-button ignition
switch then changes to “ON”.
NOTE
If the power does not switch even
though the above procedure was fol-
lowed precisely, contact your SUBARU
dealer.
& Starting engine
S09AP03
1. Apply the parking brake.
2. Shift the select lever to the “P” (Park)
position.
3. Depress the brake pedal.
4. Hold the access key fob with the
buttons facing you, and touch the
push-button ignition switch with it.
When the communication between the
access key fob and the vehicle is
completed, a chime (ding) will sound.
At the same time, the push-button
ignition switch turns to the “ACC” or
“ON” position.
5. After the push-button ignition switch
turns to the “ACC” or “ON” position,
while depressing the brake pedal,
press the push-button ignition switch.
NOTE
If the engine does not start even though
the above procedure was followed
precisely, contact your SUBARU dealer.
Access key fob – if access key fob does not operate properly
465
9
In case of emergency

Subaru Ascent 2023 Specifications

General

Brand	Subaru
Model	Ascent 2023
Category	Automobile
Language	English