北米Model "A3240BE-A" EDITED: 2022/ 7/ 29
“ACC”. Depress the brake pedal,
and press the push-button ignition
switch for at least 15 seconds. The
engine may start. Only use this
engine start procedure in case of
emergency.
. When the engine is not started, the
brake pedal may feel stiff. In such a
case, depress the brake pedal more
forcefully than usual. Check that the
operation indicator on the push-
button ignition switch turns green,
and press the push-button ignition
switch to start the engine.
& Stopping engine
S07BE04
1. Stop the vehicle completely.
2. Move the select lever to the “P”
position.
3. Press the push-button ignition switch.
The engine will stop, and the power will
be switched off.
WARNING
. Do not touch the push-button
ignition switch during driving.
When the push-button ignition
switch is operated as follows,
the engine will stop.
– The switch is pressed and held
for 3 seconds or longer.
– The switch is pressed briefly 3
times or more in succession.
When the engine stops, the brake
booster will not function. A great-
er foot pressure will be required
on the brake pedal.
The power steering system will
not operate either. A greater force
will be required to steer, and it
may result in an accident.
. If the engine stops during driving,
do not operate the push-button
ignition switch or open any of the
doors until the vehicle is stopped
in a safe location. It is dangerous
because the steering lock may be
activated. Stop the vehicle in a
safe place, and contact a
SUBARU dealer immediately.
CAUTION
. Do not stop the engine while the
select lever is in a position other
than the “P” position.
. If the engine is stopped while the
select lever is in a position other
than the “P” position, the power
will be in “ACC”. If the vehicle is
left in this condition, the battery
may be discharged.
NOTE
. If you press the push-button ignition
switch while driving, the emergency
engine stop interrupt screen alerts
the driver by messages on the
combination meter display (color
LCD) and beeps.
. Although you can stop the engine by
operating the push-button ignition
switch, do not stop the engine dur-
ing driving except in an emergency.
& When access key fob does
not operate properly
S07BE05
Refer to “Access key fob – if access key
fob does not operate properly” �P464.
Starting and stopping engine (models with push-button start system)
348
To Next Page
Loading...
Need help?
General
