北米Model "A3240BE-A" EDITED: 2022/ 7/ 29
& Moonroof switch
S02AK02
! Tilting moonroof
S02AK0201
To raise or lower the moonroof, press the
moonroof switch.
If the shade is closed past the half-open
position when the switch is pressed, it will
open up to the half-open position.
NOTE
Release the switch after the moonroof
has been raised or has been lowered
completely. Pressing the switch con-
tinuously may cause damage to the
moonroof.
! Sliding moonroof
S02AK0202
1 Open
2 Close
To open the moonroof:
When the moonroof switch is slided and
held to the open side, the moonroof will
open, then stop slightly before the fully
open position to reduce wind noise.
Slide the moonroof switch again to fully
open the moonroof.
To close the moonroof:
When the moonroof switch is slided and
held to the close side, the moonroof will
close, then stop at the tilt-up position.
Slide and hold the moonroof switch again
to fully close the moonroof.
To stop the moonroof halfway, slide the
moonroof switch either way.
NOTE
. After washing the vehicle or after it
rains, wipe away water on the roof
prior to opening the moonroof to
prevent drops of water from falling
into the passenger compartment.
. For the sake of safety, it is recom-
mended that you avoid driving with
the moonroof fully opened.
! Anti-entrapment function
S02AK0203
When the moonroof senses a substantial
enough object trapped between its glass
and the vehicle’s roof during closure, it
automatically moves back to the fully open
position and stops there. The anti-entrap-
ment function may also be activated by a
strong shock on the moonroof even when
there is nothing trapped.
CAUTION
Never attempt to test this function
using fingers, hands or other parts
of your body.
Moonroof
158
To Next Page
Loading...
Need help?
General
