Suzuki DL 650 2004 User Manual

ENGINE 3-71
Install the snap ring @.
GEARSHIFT SHAFTIGEARSHIFT ARM
DISASSEMBLY
Remove the following parts from the gearshift shawgearshift
arm.
@I Washer @ Washer
@ Snap ring
@ Plate return spring
@ Gearshift shaft return spring a Gearshift cam drive plate
@ Snap ring
,
INSPECTION
Check the gearshift shawgearshift arm for wear or bend.
Check the return springs for damage or fatigue.
REASSEMBLY
Install the following parts to the gearshift shawgearshift arm
as shown in the right illustration.
@I Washer @ Washer
@ Snap ring @ Plate return spring
@ Gearshift shaft return spring a Gearshift cam drive plate
@ Snap ring
NOTE:
When installing the gearshift shaft return spring @, position the
stopper
@ of the gearshift arm between the shaft return spring
ends
@.

Suzuki DL 650 2004 Specifications

General

Brand	Suzuki
Model	DL 650 2004
Category	Motorcycle
Language	English