GENERAL INFORMATION
1-9
SPECIFICATIONS
DIMENSIONS AND DRY MASS
................................................................
Overall length
.................................................................
Overall width
................................................................
Overall height
....................................................................
Wheelbase
Ground clearance
..........................................................
....................................................................
Seat height
.......................................................................
Dry mass
ENGINE
..............................................................................
Type
Number of cylinders
.....................................................
.............................................................................
Bore..
..........................................................................
Stroke..
................................................................
Displacement
Compression ratio
.........................................................
...................................................................
Carburetion
.....................................................................
Air cleaner
...............................................................
Starter system
Lubrication system
........................................................
......................................................................
Idle speed
DRIVE TRAIN
............................................................................
Clutch
.................................................................
Transmission
Gearshift pattern
.........................................................
Primary reduction ratio
..................................................
Final reduction ratio
.......................................................
Gear ratios, Low
...........................................................
............................................................
2nd
...........................................................
3rd..
.................................
4th
....
........................
...............................
5th..
....
........................
..........................................................
Top..
Drive chain
....................................................................
2 290 mm (90.2 in)
840 mm (33.1 in)
.....
1 390 mm (54.7 in)
Low windshield position
(STD)
.....
1 420 mm (55.9
in)
Middle windshield position
.....
1 450 mm (57.1 in)
High windshield position
1 540 mm (60.6 in)
165 mm
(
6.5 in)
820 mm (32.3 in)
190 kg (41 8 Ibs)
4-stroke, liquid-cooled, DOHC, 90 "-degree V-twin
2
81.0 mm (3.1 89 in)
62.6 mm (2.465 in)
645 cm3 (39.4 cu.in)
11.5: 1
Fuel injection
Non-woven fabric element
Electric
Wet sump
1 300
+
100 r/min
Wet multi-plate type
6-speed constant mesh
1 -down, 5-up
2.088 (71 134)
3.1 33 (4711
5)
2.461 (3211 3)
1.777 (3211 8)
1.380 (29/21)
1
.I
25 (27124)
0.961 (25126)
0.851 (23127)
DID 525 V8, 116 links
To Next Page
Loading...
Need help?
General
