730
CHASSIS
Remove the steering stem upper bearing
a.
Remove the steering stem lower bearing
@.
INSPECTION AND DISASSEMBLY
Inspect the removed parts for the following abnormalities.
*
Distortion of the steering stem
*
Bearing wear or damage
*
Abnormal bearing noise
Handlebars distriction
*
Race wear and brinelling
If any abnormal points are found, replace defective parts with
the new ones.
Remove the steering stem lower bearing inner race using a
chisel.
I
The removed bearing inner race and dust seal must be
I
/
replaced with the new ones.
I
Drive out the steering stem upper and lower bearing races
with the special tools.
09941 -5491 1
:
Bearing outer race remover
09925-1 801 1
:
Steering bearing installer