2-16
PERIODIC MAINTENANCE
MAJOR ADJUSTMENT
Remove the fuel tank. (-5-7)
Remove the air cleaner box. (-5-1
5)
Loosen the lock-nut
@
of the throttle returning cable.
Turn the returning cable adjuster
to obtain proper cable
play.
Loosen the lock-nut
@
of the throttle pulling cable.
Turn the pulling cable adjuster
@
in or out until the throttle
cable play
@
should be 2.0
-
4.0 mm (0.08
-
0.16 in) at the
throttle grip.
Tighten the lock-nut
@
securely while holding the adjuster
@.
Throttle cable play
@I:
2.0
-
4.0
mm
(0.08
-
0.16
in)
While holding the throttle grip at the fully closed position,
slowly turn the returning cable adjuster
@
to obtain a slack of
1.0 mm
(0.04
in).
Tighten the lock-nut
@
securely.
After the adjustment is completed, check that handle-
bar movement does not raise the engine idle speed
and that the throttle grip returns smoothly and auto-
matically.
THROTTLE VALVE SYNCHRONIZATION
lnspect initially at
1 000
km
(600
miles,
2
months)
(E-33
only) and every
12 000
km
(7
500
miles,
24
months).
lnspect the throttle valve synchronization periodically.
(-5-32)
EVAPORATIVE EMISSION CONTROL SYS-
TEM (E-33 ONLY)
lnspect every
12 000
km
(7
500
miles,
24
months).
Replace vapor hose every
4
years.
lnspect the evaporative emission control system periodically.
PAlR (AIR SUPPLY) SYSTEM
I
lnspect every
12 000
krn
(7
500
miles,
24
months).
(
lnspect the PAIR (air supply) system periodically. (-10-6)