ENGINE
3-3
ENGINE REMOVAL AND INSTALLATION
ENGINE
REMOVAL
Before taking the engine out of the frame, wash the engine
using a steam cleaner. Engine removal is sequentially explained
in the following steps. Reinstall the engine by reversing the
removal procedure.
Drain the engine oil.
(W2-13)
Drain the engine coolant.
(-2-18)
Remove the seat.
(-7-4)
Disconnect the battery
@
lead wire
a.
Remove the fuel tank
0.
(-5-7)
Disconnect the cooling fan motor and thermo-switch lead wire
coupler.
(W6-5)
Remove the radiator and water hoses.
(W6-5)
Remove the air cleaner box
0.
(-5-1 5)